UniFi network and Wi-Fi

One network, one app, and a replacement on the shelf in Brisbane.

Most offices end up with a firewall from one supplier, Wi-Fi from another and switches nobody has the login for. We replace that with UniFi, designed from a survey and covered so a failure is a swap, not a crisis.

Real Bytes is a UniFi Enterprise Partner. Our engineers hold Ubiquiti URSCA, UFSP and UWA certifications.

  • UI Care on every device we sell
  • Replacement stock held in Brisbane
  • No per-device licence to run

Reviewed by Blake Bath, General Manager, on 30 October 2026.

A round white wireless access point on an office ceiling above an open-plan floor of people working at laptops, with city views through the windows.
Gateway failed?UI Care advance replacement, up to five years.

What decides the design

Five things decide how good your network is.

The brand matters less than these. They are what we look at first on every site.

Where the access points go

Wi-Fi problems often come from placement: walls, ceilings, glass and where people sit. We design from a survey of the building, not from where the old access points were screwed in.

  • Walk the site and note building materials
  • Place for where people work and meet
  • Check coverage again after install

Health check

Eight things every business network should have.

Tick what is true for your network today. The gaps are what we would fix first, in roughly this order. Copy the list for your current provider or for us.

Tick what is already true for your network. Be honest: the gaps are where faults and breaches start.

Where you stand

0of 8 basics in place

8 gaps to close.

  • Separate networks for staff, guests, cameras and devicesA compromised camera or guest laptop should not be able to reach your file server.
  • Admin logins with MFA, no shared accountsShared admin passwords outlive the people who knew them.
  • Config backed up off the deviceWithout it, a failed gateway means rebuilding the network from memory.
  • Firmware updated on a scheduleUnpatched network gear is a known way in for attackers.
  • UPS on the rackA brownout should not take the whole office offline or corrupt a config.
  • Wi-Fi placed from a surveyWi-Fi problems often come from placement, not bandwidth.
  • An IP plan and a network diagramThe next engineer, or your insurer, will ask for it.
  • Hardware cover and a replacement planA failed core switch with no cover means days, not hours, offline.
Book a network survey

Engineer's take

Why every device we sell carries UI Care.

Blake Bath, our General Manager, made it a rule: every UniFi device Real Bytes sells or supports carries UI Care. It gives advance replacement for up to five years, so a failed unit is swapped rather than sent away and waited on.

It also answers an objection we hear about UniFi: that it is home gear, and that replacements take months. Our replacement relationship is direct with our distributor, Leader, whose Brisbane warehouse holds replacement stock for us. Eligible gear through their Elite Integrator program also carries a three year manufacturer warranty.

The other half is the config. Hardware can be replaced in a day. A network nobody wrote down cannot. So keep the configuration backed up off the device, and a diagram that matches what is actually there.

From our jobs

What this looks like on real sites.

  • Fortress Gateways in the field

    We run Ubiquiti Enterprise Fortress Gateways at client sites in Brisbane and up the Queensland coast. Ubiquiti rates them for 12.5 Gbps of intrusion prevention and Shadow Mode failover to a second gateway.

  • A Defence certified engineering firm

    A client working under Defence certification runs its network on UniFi with us. If you need a reference from a business with strict security obligations, ask.

  • A full network replacement, on film

    We replaced the network for one of our longest standing clients, and we are filming a video case study with them in December about what changed for their business.

  • Moving off ageing Meraki

    For a manufacturer on end of life Meraki, we scoped the gateway, core and every switch as one stage rather than a gateway-only swap.

    UniFi vs Meraki

Cost

What drives the price.

No per-device licence means the cost is hardware, cabling and our time. Labour is $195 per hour ex GST, scoped after the survey.

  • Size of the siteFloor area, number of floors and building materials decide how many access points you need.
  • Switching and PoEPorts, PoE budget for access points and cameras, and uplink speeds between switches.
  • GatewayFrom a small cloud gateway to an Enterprise Fortress Gateway pair with failover, depending on users and internet links.
  • Cover and extrasUI Care on every device, and optional CyberSecure threat feeds where they add value.

The Australian guidance

Where your network sits in ASD's Essentials.

ASD's Essentials for enterprise IT, published 15 October 2026, puts Boundary services and Identity services in priority phase 1, because they are common ways in for attackers. Your gateway, firewall and remote access sit squarely in that first phase.

Network segmentation and segregation, secure configuration management and legacy system management are all principles in the enterprise IT chapter. A split network, a backed-up config and replaced end of life gear are how a small business meets them in practice.

Mistakes we see

Five ways business networks go wrong.

  • One flat networkGuests, cameras and staff laptops all on the same network, with nothing between them.
  • Shared admin passwordsOne login known by three past contractors, no MFA, and nobody sure who changed what.
  • Access points where the old ones wereNew hardware in old positions gives the same dead spots.
  • Half on one platform, half on anotherA new gateway in front of an old core is two systems to troubleshoot and no clean way back.
  • Nothing written downNo IP plan, no diagram, no config backup. Every fault starts with an investigation.

How we deliver it

From survey to support in six steps.

  1. Step 1Survey

    Walk the site, map the building, and record what is there now, including logins and licences.

  2. Step 2Design

    Access point placement, network zones, switching and PoE, gateway sizing and failover.

  3. Step 3Price it twice

    A list price estimate first, then a distributor project bid, which takes about two weeks.

  4. Step 4Build and stage

    Configure before the install day, with UI Care attached to every device.

  5. Step 5Cutover

    One booked window per site, then coverage and failover tested before handover.

  6. Step 6Document and support

    Config backed up, diagram and IP plan handed over, and ongoing support from the same engineers.

Questions

What people ask before they replace a network.

Do UniFi networks need yearly licences?

No per-device licence is needed for the network to run and stay managed. Optional paid extras exist, such as CyberSecure threat feeds and UI Care hardware cover, and we tell you which are worth it for your site.

Is UniFi really business grade?

We run Ubiquiti Enterprise Fortress Gateways at client sites in Brisbane and up the Queensland coast. Ubiquiti rates that gateway for 12.5 Gbps of intrusion prevention, 500+ UniFi devices and 5,000+ users, with Shadow Mode failover to a second unit. A Defence certified engineering firm runs its network on UniFi with us.

What happens if a switch or gateway fails?

We attach UI Care to every UniFi device we sell, which gives advance replacement for up to five years, and our distributor holds replacement stock in its Brisbane warehouse. Eligible gear bought through our distributor program also carries a three year manufacturer warranty.

Can you work alongside our existing IT provider?

Yes. We can run the UniFi firewall, routing and Wi-Fi in a co-managed arrangement while your current provider keeps looking after desktops and servers.

Can you move us in stages?

Access points can follow later, but the gateway, the core and every switch move together. Running two platforms in the core makes faults harder to find and leaves no clean way back.

How long does a new network take?

After the survey, hardware is priced at list first and then as a project bid through our distributor, which takes about two weeks. The cutover itself is booked as one planned window for each site.

Next step

Send us a floor plan. We will tell you what it needs.

An engineer will reply with a first design, a list of what we would keep and replace, and how long it takes.

Chip, the Real Bytes support assistant

Cookie Preferences

We use cookies to improve your experience, analyse site traffic, and personalise content. By clicking "Accept All", you consent to our use of cookies. Privacy Policy

Privacy Act 1988 compliant. Your data is never sold.